1096 GI/2026 (1) रजिस्ट्री सं. डी.एल.- 33004/99 REGD. No. D. L.-33004/99 xxxGIDHxxx xxxGIDExxx असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण् ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार से प्रकाजित PUBLISHED BY AUTHORITY वाजणज् य और उद्योग मंत्रालय (उद्योग संवधधन और आंतररक व् यापार जवभाग) आदेि नई ददल्ली, 12 फरवरी,…
Official record
Open source pageवाणिज्य और उद्योग मंत्रालय (उद्योग संवर्धन और आंतरिक व्यापार विभाग) आदेश नई दिल्ली, 12 फरवरी, 2026
का.आ. 777(अ).— भारतीय मानक ब्यूरो अधिनियम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त शक्तियों का प्रयोग करते हुए, केंद्र सरकार का, भारतीय मानक ब्यूरो से परामर्श करने के बाद यह मत है कि यह जनहित में आवश्यक अथवा हितकर है, अतः एतद्द्वारा उक्त तालिका के कॉलम (2) में विनिर्दिष्ट गुणवत्ता नियंत्रण आदेशों में, कॉलम (3) में संबंधित प्रविष्टियों में विनिर्दिष्ट सीमा तक, निम्नलिखित संशोधन करती है, अर्थात्:-
तालिका
| क्रम सं. | गुणवत्ता नियंत्रण आदेश का शीर्षक | संशोधन |
|---|---|---|
| (1) | (2) | (3) |
| 1. | फ्लेम-उत्पन्न करने वाले लाइटर (गुणवत्ता नियंत्रण) आदेश, 2023 दिनांक 5 जुलाई, 2023 | उक्त आदेश में, पैरा-2 में, उप-पैरा (2) के लिए, निम्नलिखित को प्रतिस्थापित किया जाएगा, अर्थात्: - |
| 2. | पेयजल की बोतलें (गुणवत्ता नियंत्रण) आदेश, 2024 दिनांक 5 मार्च, 2024 | उक्त आदेश में, पैरा-2 में, दूसरे परंतुक के लिए, निम्नलिखित परंतुक को प्रतिस्थापित किया जाएगा, अर्थात्: - |
| 3. | वेल्डिंग रॉड और इलेक्ट्रोड (गुणवत्ता नियंत्रण) आदेश, 2023 दिनांक 14 जुलाई, 2023 | उक्त आदेश में, पैरा-2 में, दूसरे परंतुक के लिए, निम्नलिखित परंतुक को प्रतिस्थापित किया जाएगा, अर्थात्: - |
| 4. | घरेलू उपयोग के लिए इंसुलेटेड फ्लास्क, बोतलें और कंटेनर (गुणवत्ता नियंत्रण) आदेश, 2024 दिनांक 5 मार्च, 2024 | उक्त आदेश में, पैरा-2 में, दूसरे परंतुक के स्थान पर निम्नलिखित परंतुक प्रतिस्थापित किया जाएगा, अर्थात्:- |
| 5. | इलेक्ट्रिक सीलिंग टाइप फैन (गुणवत्ता नियंत्रण) आदेश, 2023 दिनांक 9 अगस्त, 2023 | उक्त आदेश में, पैरा-2 में, दूसरे परंतुक के स्थान पर, निम्नलिखित परंतुक प्रतिस्थापित किया जाएगा, अर्थात्: - |
| 6. | प्रयोगशाला ग्लासवेयर (गुणवत्ता नियंत्रण) आदेश, 2023 दिनांक 1 जनवरी, 2024 | उक्त आदेश में, पैरा-2 में, तीसरे परंतुक के बाद, निम्नलिखित परंतुक जोडा जाएगा, अर्थात्: - |
| 7. | एयर कूलर और एयर फिल्टर (गुणवत्ता नियंत्रण) आदेश, 2025 30 जनवरी, 2025 | उक्त आदेश में, पैरा-2 में, तीसरे परंतुक के स्थान पर, निम्नलिखित परंतुक प्रतिस्थापित किया जाएगा, अर्थात्: - |
| 8. | फर्नीचर (गुणवत्ता नियंत्रण) आदेश, 2025 दिनांक 13 फरवरी, 2025 | उक्त आदेश में, पैरा-2 में, तीसरे परंतुक के स्थान पर, निम्नलिखित परंतुक प्रतिस्थापित किया जाएगा, अर्थात्: - |
(नोट: उपर्युक्त क्रम संख्या 1 से 8 के कॉलम (3) में प्रतिस्थापित/जोड़े जाने वाले परंतुक का पाठ निम्नलिखित है:)
बशर्ते कि इस आदेश में कुछ भी सूक्ष्म, लघु और मध्यम उद्यम मंत्रालय के उद्यम पोर्टल के तहत पंजीकृत ऐसे उद्यम द्वारा विनिर्मित वस्तुओं या सामग्री पर लागू नहीं होगा, जिसमें वास्तविक लागत पर संयंत्र और मशीनरी या उपकरण में निवेश, एक करोड़ रुपए से अधिक नहीं है और कारोबार चार्टर्ड एकाउंटेंट द्वारा प्रमाणित किए गए अनुसार पिछले वित्त वर्ष के लिए पांच करोड़ रुपए से अधिक नहीं है।
[फा. सं. पी-29014/188/2025–एलईआई] संजीव, संयुक्त सचिव
MINISTRY OF COMMERCE AND INDUSTRY (Department for Promotion of Industry and Internal Trade) ORDER New Delhi, the 12th February, 2026
S.O. 777(E).— In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government is of the opinion that it is necessary or expedient in the public interest, after consulting the Bureau hereby makes the following amendments in the Quality Control Orders specified in column (2) to the extent specified in the corresponding entries in column (3), of the said Table, namely :-
TABLE
| SI No. | Title of Quality Control Order | Amendments |
|---|---|---|
| (1) | (2) | (3) |
| 1. | Flame-Producing Lighters (Quality Control) Order, 2023 dated 5th July, 2023 | In the said Order, in paragraph-2, for sub-paragraph (2), the following shall be substituted, namely: - |
| 2. | Potable Water Bottles (Quality Control) Order, 2024 dated 5th March, 2024 | In the said Order, in paragraph-2, for the second proviso, the following proviso shall be substituted, namely: - |
| 3. | Welding Rods and Electrodes (Quality Control) Order, 2023 dated 14th July, 2023 | In the said Order, in paragraph-2, for the second proviso, the following proviso shall be substituted, namely: - |
| 4. | Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2024 dated 5th March, 2024 | In the said Order, in paragraph-2, for the second proviso the following proviso shall be substituted, namely:- |
(Note: The text of the proviso to be substituted/inserted in column (3) of serial numbers 1 to 8 above is as follows:)
Provided that nothing in this order shall apply to goods or articles manufactured by an enterprise, registered under Udyam Portal of the Ministry of Micro, Small and Medium Enterprises, wherein the investment in plant and machinery or equipment at original cost does not exceed rupees one crore and the turnover do not exceed rupees five crore for the previous financial year as certified by a Chartered Accountant.
[F. No. P-29014/188/2025-LEI] SANJIV, Jt. Secy.
Research the source law
This record is not yet linked to a specific provision. Browse the law library, choose the affected provision and ask against the exact statutory text.
Browse source laws| 5. | Electric Ceiling Type Fans (Quality Control) Order, 2023 dated 9th August, 2023 | In the said Order, in paragraph-2, for the second proviso, the following proviso shall be substituted, namely :- |
| 6. | Laboratory Glassware (Quality Control) Order, 2023 dated 1st January, 2024 | In the said Order, in paragraph-2, after the third proviso, the following proviso shall be inserted, namely :- |
| 7. | Air Cooler and Air Filters (Quality Control) Order, 2025 30th January, 2025 | In the said Order, in paragraph-2, for the third proviso, the following proviso shall be substituted, namely :- |
| 8. | Furniture (Quality Control) Order, 2025 dated 13th February, 2025 | In the said Order, in paragraph-2, for the third proviso, the following proviso shall be substituted, namely :- |